there is not gmplayer

mlij at globo.com mlij at globo.com
Mon Aug 22 17:24:51 PDT 2005


Firstly, I compiled without some --enables.
I do not know why reason I put &&.
In portuguese I could say `Foi mal`!
It is running now.
Thanks.

 '>'>I am using BLFS 6.1.
 '>'>
 '>'>I have installed fluxbox.
 '>'>
 '>'>I did not installed all packages.
 '>'>I can run mplayer in the xterm.
 '>'>
 '>'>I noted that the gmplayer was not installed.
 '>'>
 '>'>Why?
 '>'>
 '>'>My configure was the following:
 '>'>patch -Np1 -i ../MPlayer-1.0pre7-kernel_2.6-1.patch &&
 '>'>./configure --prefix=/usr --confdir=/etc/mplayer \
 '>'>    --enable-largefiles && --with-codecsdir=/usr/lib/mplayer/codecs
&& --enable-gui
 '>'>&& --enable-shared-pp && --disable-fastmemcpy && --enable-menu 
 '>'>
 '>'>
 '>'>  
 '>'>
 '>'Maybe try this as your configure line (assuming you have already patched
 '>'the source):
 '>'
 '>'./configure --prefix=/usr --confdir=/etc/mplayer --enable-largefiles
--with-codecsdir=/usr/lib/mplayer/codecs
 '>'--enable-gui
 '>'--enable-shared-pp --disable-fastmemcpy --enable-menu
 '>'
 '>'The && should only be used between commands to 'link' them together.
 '>'
 '>'for example 'mkdir test && cd test' will make a directory called test
and
 '>'then move into it, but only if the make test command was successful.
 '>'
 '>'Cheers,
 '>'
 '>'Duncan
 '>'
 '>'-- 
 '>'http://linuxfromscratch.org/mailman/listinfo/blfs-support
 '>'FAQ: http://www.linuxfromscratch.org/blfs/faq.html
 '>'Unsubscribe: See the above information page





More information about the blfs-support mailing list