I can't setup two network interfaces

David Rosal david.rosal at upf.edu
Wed Nov 30 09:10:17 PST 2005


Andrew Benton wrote:
> David Rosal wrote:
> 
>> I'm using an LFS-6.1 system with a non-modular kernel 2.6.11.12.
>> The computer has two gigabit network cards, but I have used only one 
>> until today, named as eth0.
> 
> 
> What does lspci say about the cards? lspci is part of pciutils

$ lspci
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor 
to I/O Controller (rev 0e)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express 
Root Port (rev 0e)
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) High Definition Audio Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC 
Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA 
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 
[Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
02:00.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
02:01.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter 
(rev 11)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 
Gigabit Ethernet (rev 10)
02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 
IEEE-1394a-2000 Controller (PHY/Link)
$

And:

$ lspci -v | sed -n '/Ethernet/,$p'
02:01.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter 
(rev 11)
         Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
         Memory at eb010000 (32-bit, non-prefetchable) [size=16K]
         I/O ports at a400 [size=256]
         Capabilities: [48] Power Management version 2
         Capabilities: [50] Vital Product Data

02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 
Gigabit Ethernet (rev 10)
         Subsystem: Giga-byte Technology GA-K8VT800 Pro Motherboard
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 21
         I/O ports at a800 [size=256]
         Memory at eb019000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [dc] Power Management version 2

02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
         Subsystem: Giga-byte Technology Unknown device 1000
         Flags: bus master, medium devsel, latency 32, IRQ 23
         Memory at eb018000 (32-bit, non-prefetchable) [size=2K]
         Memory at eb014000 (32-bit, non-prefetchable) [size=16K]
         Capabilities: [44] Power Management version 2



Cheers.

*david



More information about the blfs-support mailing list