[blfs-support] Usb error on boot/ or insert

spiky martynvidler at aol.com
Mon Mar 11 11:52:19 PDT 2013


Hi

I have just built LFS-7.3 I am getting an error with usb devices. They 
dont get allocated to usb2 "as far as I can make out" they try usb1 1st.
kern.log as usb device plugged in.
Kernel 3.8.2

new high-speed USB device number 5 using ehci-pci
[   84.454026] usb 1-1: khubd timed out on ep0out len=0/0
  [   89.666140] usb 1-1: khubd timed out on ep0out len=0/0
  [   89.867011] usb 1-1: device not accepting address 5, error -110
  [   89.867865] hub 1-0:1.0: unable to enumerate USB device on port 1
  [   89.874013] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
  [   89.874023] ehci-pci 0000:00:10.4: GetStatus port:1 status 003802 
0  ACK POWER OWNER sig=j CSC
  [   89.874030] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
  [   89.954010] usb usb2: wakeup_rh (auto-start)
  [   89.978012] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms 
status 0x100
  [   89.978017] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
  [   89.978024] uhci_hcd 0000:00:10.0: port 1 portsc 0093,00
    89.978030] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
  [   90.082012] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms 
status 0x101
  [   90.184011] usb 2-1: new full-speed USB device number 2 using uhci_hcd
  [   90.358042] usb 2-1: not running at top speed; connect to a high 
speed hub
  [   90.421042] usb 2-1: default language 0x0409
  [   90.516048] usb 2-1: udev 2, busnum 2, minor = 129
   90.516053] usb 2-1: New USB device found, idVendor=050d, idProduct=705a
  [   90.516938] usb 2-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
  [   90.517819] usb 2-1: Product: Belkin 54g USB Network Adapter
  [   90.518671] usb 2-1: Manufacturer: Belkin
  [   90.520264] usb 2-1: usb_probe_device
  [   90.520273] usb 2-1: configuration #1 chosen from 1 choice
  [   90.523068] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  [   90.608200] rt73usb 2-1:1.0: usb_probe_interface
  [   90.608209] rt73usb 2-1:1.0: usb_probe_interface - got id
  [   90.710017] usb 2-1: reset full-speed USB device number 2 using 
uhci_hcd
  [   91.176358] ieee80211 phy0: Selected rate control algorithm 
'minstrel_ht'
  [   91.179398] usbcore: registered new interface driver rt73usb

It has a VIA motherboard
Dose anyone know of a fix

Thk you



More information about the blfs-support mailing list